warning
🚧 This document is still being actively worked on and is subject to change. 🚧
| Responsible |
|
| Last Updated | 10/12/2025, 12:48:54 PM |
| Last Author | Kai Berszin |
Shock
| Subject | Description |
|---|---|
| Testing Model | Fully assembled CubeSat |
| Product Description | Shock Test |
| Test Reason |
- Issue date: <Insert Date>
- Approved by: <Insert Name>
- Responsible Test Engineer: <Insert Name>
Shock
Testing Equipment​
- Shakertable
- Structural Sensors (defined in Overview Strucutral Testing)
- EQM Adapter and EQM Model
- Locktie for the screws
Test Method​
- We conduct the Test with an acceleration of 6g and 6 db for 6 min
- Performed in each of the three principal acis
- Duration: 1h
Check Condition and Requirements​
- Verifing that no mode shift occured according to the criterias on the low-level sine sweep page
- No visible mechanical deformation, damage or loosed screws (also according to criterias in low-level sine sweep page)
<Describe the condition that we want to check (what, how)> <If any tests are done afterwards, they should also be added to this chapter (for example manual inspection)>
Test Results​
<Describe the results of the test in a short fasion>
Test Judgement​
Appendix​
Photo of testing​
<Insert picture of the exact testing configuration>
Testing data​
<Insert a table or diagram of the exact output of the test (without intepretation)>