warning

🚧 This document is still being actively worked on and is subject to change. 🚧

Responsible	Janik Hackel
Last Updated	10/12/2025, 12:48:54 PM
Last Author	Kai Berszin

Inspiration

Inspiration for this template were:

• https://dc.winmate.com.tw/_downloadcenter/2009/Rugged/084VM%20LCD%20VO.pdf
• https://www.nasa.gov/wp-content/uploads/2017/03/nasa_csli_cubesat_101_508.pdf
• https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fecss.nl%2Fwp-content%2Fuploads%2F2021%2F08%2FECSS-E-ST-10-02C-Rev.1(1February2018)-Annex-A_(Verification-Plan).docx&wdOrigin=BROWSELINK

Testing Report Template

<Insert the name of the Report>

Subject	Description
Testing Model
Product Description
Test Reason

• Issue date: <Insert Date>
• Approved by: <Insert Name>
• Responsible Test Engineer: <Insert Name>

<Insert the test that is performed>

Testing Equipment

• <Name all the testing equipment including controler, control software and sensor. If necessary please specify them>

Lab Enviroment Conditon

• Ambient temperature: <Insert temperature>
• Relative humidity: <Insert humidity>

Test Method

• <Insert standards that were applied>
• <Insert the settings of the test>
• Duration: <Insert time>
• Testing date: <Insert Testing date>
• Link or describe the measurements profiles The sensors used and the exact test input should be mentioned in this section

Check Condition and Requirements

<Describe the condition that we want to check (what, how)> <If any tests are done afterwards, they should also be added to this chapter (for example manual inspection)>

Test Results

<Describe the results of the test in a short fasion>

Test Judgement

<Give the formula for calculating the testing criterias and if they were met> If multiple criterias apply or different criterias for different parts, please list them in a visually easy to read manner.

Appendix

Photo of testing

<Insert picture of the exact testing configuration>

Testing data

<Insert a table or diagram of the exact output of the test (without intepretation)>